| IEEE/ICC Minutes Index |
| ID | | Presentation Title |
| Author(s) | Affiliation | Date | Location | Appndx | Keywords |
| 515 | | Waltz Mill 500/550 KV Cable and Splice |
| Blodgett, R. | 75S | Baltimore, MD | V-A | Research |
| 516 | | Splice Failure in Anaconda's 550 KV Pipe Cable at Waltz Mill |
| Blodgett, R. | 76F | Houston, TX | III-C | Research Joint Pipe Type |
| 517 | | Performance of Extruded Dielectric Insulating Materials |
| Blodgett, R. | 74S | Niagara Falls Canada | V-D | Insulation |
| 518 | | Report to ICC-Subcommittees ICEA-NRC Fire Test Situation |
| Blodgett, R. Conley, J. | 79F | Phoenix, AZ | V-B | Flammability |
| 519 | | Performance of Extruded Dielectric Materials Task Group 5-25 |
| Blodgett, R. | 77F | Milwaukee, WI | V-C | Insulation Plastic |
| 520 | | Moisture Vapor Transmission of Thermoplastic Semi-Conductors |
| Blodgett, R. | Anaconda Cable | 78F | St. Petersburg, FL | V-D | Plastic Semiconductor |
| 521 | | Closure of AIEE Paper 53-386 |
| Bodicky, A. | 54S | St. Louis, MO | 4 | Submarine |
| 522 | | Data on Relative Movement of Cables with Regular and Annealed Conductors |
| Bodicky, A. | Union Elec | 58F | New York, NY | VI-B | Conductor |
| 523 | | Surface Contamination of Insulated Non Shielded Cables |
| Bodicky, A. | Union Elec | 60F | New York, NY | VI-B | Non-shield-cables |
| 524 | | Effect of Surface Contamination on Insulated Cables |
| Bodicky, A. | Union Elec | 61S | Elmira, NY | IX-A | 5kV Non-metallic-sheath |
| 525 | | Non-corrosive Cable Support Hardware Development by Detroit Edison |
| Bogden, D. | Detroit Edison | 88F | St. Petersburg, FL | XI-B | Manhole |
| 526 | | Use of Liquid Thermosetting Resins for Splicing & Terminating |
| Boilmeier, E. | 3M | 58S | Miami Beach, FL | 13 | Joint Termination |
| 527 | | Molded Resin-Sealed Terminations |
| Boilmeier, E. Vokaty, L. | 3M | 59S | Detroit, MI | X-A | Termination |
| Tuesday, January 17, 2006 | http://www.ewh.ieee.org/soc/pes/icc/ | Page 41 of 166 |