The ICC Website is changing.  As this transition is made, our new format can be found at www.pesicc.org/ICCWP. Please send any comments or questions to mvh@voncorp.com.

Spring 2013 Insulated Conductors Committee Awards

ICC Certificates of Appreciation

ICC Certificates of Appreciation were presented to the following:

• Martin Tennie for Best Presentation at the Fall 2012 Subcommittee A Meeting, Superabsorbent Polymers as Water-Blocking Components in Cables
• Charles Hills for Best Presentation at the Fall 2012 Subcommittee B Meeting, Dielectric Strength of Silicone
• Glen J. Bertini for Best Presentation at the Fall 2012 Subcommittee C Meeting, Neutral Corrosion: Significance, Causes and Mitigation  
• Manfred J. Bawart for Best Presentation at the Fall 2012 Discussion Group C11 Meeting, Fault Location on Long Submarine Cables
• James Conrad for Best Presentation at the Fall 2012 Subcommittee D Meeting, Review UL 2196 Tests for Fire Resistive Cables When Tested in Rigid Metal Conduit (RMC)
• Tim Hayden for Best Presentation at the Fall 2012 Subcommittee F Meeting, Case Study of VLF / Tan Delta & Partial Discharge Acceptance Testing of New 23 kV Cables

IEEE/PES Technical Committee Certificates of Appreciation

 IEEE/PES Certificates of Appreciation were presented to the following:

•  

• Harry Yaworski for Services Rendered as Chair, Subcommittee B Accessories 2010 – 2012
• John Merando for Services Rendered for the Reaffirmation of  IEEE 1235-2000 Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
• Paul Caronia for Services Rendered for the Reaffirmation of  IEEE 1235-2000 Guide for the Properties of Identifiable Jackets for Underground Power Cables and Ducts
• Ram Ramachandran for Services Rendered as Chair, Discussion Group A14 Power Cable Standards
• Glenn Luzzi for Services Rendered as Chair, Working Group B02 IEEE 404-2012 Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV
• Saleman Alibhay for Services Rendered as Vice-Chair, Working Group B02 IEEE 404-2012 Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2.5 kV to 500 kV
• Phil Cox for Services Rendered as Vice-Chair, Working Group B8 Standards for Copper and Aluminum Insulated Cable Connectors
• David Crotty for Services Rendered as Chair, Working Group B19 IEEE 1816-2013 Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating Accessories
• Mike Smalley for Services Rendered as Vice-Chair, Working Group B19 IEEE 1816-2013 Guide for Preparation Techniques of Extruded Dielectric, Shielded Cables Rated 2.5 kV through 46 kV and the Installation of Mating Accessories
• Dave Purnhagen for Services Rendered as Chair, Working Group C1 Reaffirmation of IEEE 835-1994 Standard Power Cable Ampacity Tables  
• Todd Goyette for Services Rendered as Vice-Chair, Working Group C1 Reaffirmation of IEEE 835-1994 Standard Power Cable Ampacity Tables  
• Dennis Johnson for Services Rendered as Chair, Working Group C23 IEEE 1793-2012 Guide for Planning and Designing Transition Facilities between Overhead and Underground Transmission Lines
• David Campilii for Services Rendered as Vice-Chair, Working Group C23 IEEE 1793-2012 Guide for Planning and Designing Transition Facilities between Overhead and Underground Transmission Lines
• Mohamed Chaaban for Services Rendered as Chair, Working Group C24 IEEE 1718-2012 Guide for Temperature Monitoring of Cable Systems
• Chris Grodzinski for Services Rendered as Vice-Chair, Working Group C24 IEEE 1718-2012 Guide for Temperature Monitoring of Cable Systems
• Albert Kong for Services Rendered as Chair, Working Group C29 IEEE 1727-2013 Guideline For Working Procedures On Underground Transmission Circuits With Induced Voltage
• Pierre Argaut for Services Rendered as Vice-Chair, Working Group C29 IEEE 1727-2013 Guideline For Working Procedures On Underground Transmission Circuits With Induced Voltage
• Malia Zaman for Administrative Support in the Publication of IEEE 1727-2013 Guideline For Working Procedures On Underground Transmission Circuits With Induced Voltage
• Ken Bow for Services Rendered as Chair, Working Group D11 Revision of IEEE 1143-2012 Guide on Shielding Practice for Low Voltage Cables
• Mick Bayer for Services Rendered as Vice-Chair, Working Group D11 Revision of IEEE 1143-2012 Guide on Shielding Practice for Low Voltage Cables
• John Merando for Services Rendered as Chair, Working Group D14 IEEE 422-2012 Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
• William Bloethe for Services Rendered as Vice-Chair, Working Group D14 IEEE 422-2012 Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
• Charles Hills for Services Rendered as Chair, Working Group D15 Reaffirmation of IEEE 1202-2006 Standard for Flame-Propagation Testing of Wire & Cable
• Gabe Taylor for Services Rendered as Vice-Chair, Working Group D15 Reaffirmation of IEEE 1202-2006 Standard for Flame-Propagation Testing of Wire & Cable
• Jan Pirrong for Services Rendered as Chair, Working Group D16 IEEE 1682-2012  Trial-Use Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Nuclear Power Generating Stations
• Kofi Korash for Services Rendered as Vice-Chair, Working Group D16 IEEE 1682-2012  Trial-Use Standard for Qualifying Fiber Optic Cables, Connections, and Optical Fiber Splices for Use in Nuclear Power Generating Stations
• Ying Li Wen for Services Rendered as Chair, Working Group F01 IEEE 400-2012 Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
• Jacques Cote for Services Rendered as Vice-Chair, Working Group F01 IEEE 400-2012 Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
• John Densley for Services Rendered as Chair, Working Group F03 IEEE 400.2-2013 Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)
• Tim Hayden for Services Rendered as Vice-Chair, Working Group F03 IEEE 400.2-2013 Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF)

IEEE/PES Fellows Class of 2013

The Institute of Electronic and Electrical Engineers (IEEE) highest grade of Fellow recognizes excellence for notable achievements in power engineering and industrial applications.  The Fellow grade is conferred upon people of outstanding and extraordinary qualifications and experience in the various fields of the IEEE for their important individual contributions to one or more technical fields.  In accordance with IEEE bylaws, the total number of Fellows selected in any one year does not exceed one-tenth of one percent of the total membership of over 429,000 people. The selection to Fellow requires the endorsement of five Fellows, a Technical Committee, and the Board of Fellows of an IEEE Society as well as the IEEE Board of Directors.

 Serge Pelissou was one of 297 IEEE Senior Members and the only Insulated Conductors Committee member recognized for contributions to characterization of extruded cables and components in their life cycle

May 14, 2013

IEEE prohibits discrimination, harassment and bullying. For more information, visit ieee.org/web/aboutus/whatis/policies/p9-26.html
Privacy & Opting Out of Cookies  Terms & Conditions
IEEE ICC PES & Design is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc.